Projector Retrofits
This is the ultimate upgrade for your Mitsubishi. Adding in high quality OEM projectors such as the Acura TSX projectors will significantly increase visibility and light spread all while adding a lot of appeal to the headlamps because of the colors they produce from a distance. The stock evolution projectors lack intensity and width, with this conversion you are not only adding appeal to your lamps but you are also adding performance.
All projector retrofits are fully tested before shipment to meet all our standards. The factory aiming knobs and leveling motors are always fully functional after the modifications are performed by us. Color modding and washer modifications are performed to the extent where the cutoff pattern of the projector is improved; but we will never let the performance of the projector diminish from our modifications. We take so much pride in our work that most non-enthusiasts will not be able to tell the headlamps have been modified because we aim for the ultimate OEM look. There is always after-purchase support as well, please do not hesitate to contact us with any questions or concerns. Turn around time for this service is 2-3 business days and time varies depending on the amount of customization being performed. The final product is completely plug and play and requires no modifications while reinstalling.
Not sure which projector is right for you? View our in-depth FAQ with photos and descriptions on High-Intensity.org!
Please note that all projector retrofits require HID bulbs, ballasts, and a relayed wiring harness to complete the conversion if your car did not originally come with HID lighting. When you place a deposit on your projector retrofit, please order the HID kit and wiring harness at the same if you want a completely plug and play HID upgrade. Also, please be advised your order will be placed on a waiting list after you have placed your deposit. Please be aware it is possible you may be waiting for up to 3-4 weeks before we ask you to send your lamps in. The remaining balance on the order will be asked for before the final products are shipped out. Orders paid in full ahead of time assure the quickest turn around. We do have a priority service available which allows us to complete your conversion during off-hours for an additional fee of $125.
Plug & Play Wiring Harnesses
These harnesses will allow the user to safely wire up their Xenon/Halogen lighting and horn systems by running power directly from the battery through a relayed harness that will be triggered by a factory connector. This way you can assure the stock wiring system is not overloaded; which can cause long-term issues such as wires melting or even catching on fire. Using relays eliminates the need to power up your lighting system using the already insufficiently thin stock wiring. The output from your lighting system may be compromised if you do not use a relayed wiring harness since so may experience significant voltage drop by directly taking power from the stock wiring. Using relays and our thicker gauge wiring provides the right amount of current carrying capacity to bring your system up to full performance in a safe way.
Relays - We use high quality Tyco (formerly Bosch) relays for our custom made harnesses.
Relay Sockets - Many harness makers skip this step, but this step makes replacing a relay a snap, in case for whatever reason the relays do fail.
Waterproof ATO Fuse Holders - Used in case of a short. Systems use main fuses before the relay. You also have the option of adding a fuse before each of the ballasts, although we feel this is unnecessary.
Direct plug into stock wiring - Absolutely no modifications to the car needed besides in some applications the addition of a quick disconnect which is supplied in the kit. We can either leave the ends bare for you to crimp or solder whatever you need "Flying Lead", terminate the ends with Crimped on Quick Disconnects, or you can send me the appropriate connectors for your ballasts and bi-xenon solenoids or High Beam bulbs and we will solder them on.
Split Loomed - For the OEM look and to protect the wiring. All connections are soldered and heat shrunk wherever possible. Soldering gives a very strong airtight joint. We use quality Adhesive Lined heat shrink.
Quality 14 Gauge Wiring - Good for 32amps. A pair of ballasts draws 15amps or so at startup. They then draw about 6amps to run. A pair of 55W Halogen bulbs draws about 10amps.
Custom Length - The custom harnesses are made on a per order basis; we can make it whatever length you need so that you have enough to reach where needed and to hide the wiring out of the way, but not too much to have a huge roll of it in a corner. Please let us know if you need something specific, and we will get you a price on the harness if we can make it.
Already know what you want? Checkout now!
DIGITAL 35w or 55w HID Kits
While we emphasize using OEM components on certain projects, we have personally tested these and have found them to be very impressive. The material quality and build quality of DIGITAL HID's products is second to none. Couple this with their lifetime warranty and it is clear why their kits offer the best value on the market. Available in 35watt or even 55watt, it would be a nice way to get some extra lighting performance and visual appeal out of your current lighting setup.
Ballasts are 100% digitally controlled, extremely high efficiency, waterproof, require under 6.5A of starting current, and very low operating current for flawless plug and play operation! Bulbs are rated at 3500 hrs., with the least variance available on the market, all within +/- 100 lm and +/- 200K CCT.
All items are brand new and come with 2 DIGITAL waterproof ballasts, 2 HID Bulbs, mounting brackets, adapters, and a LIFETIME WARRANTY all in an attractive metal case!
CE and UL safety listed, ISO registered manufacturing, E4 mark.
Custom sizes and temperatures are available, please contact us TODAY!
Installation:
Our kits are designed to fit original stock headlamp sockets without modification, making installation a simple plug and play process. Often times installation can be done individually in a matter of minutes. But a professional installer is always recommended for performance and safety reasons.
LightWerkz wiring harnesses are reccomended for a safer installation.
Confused as to which kit your automobile requires?
Please visit Sylvania's Automotive Bulb Replacement Guide.
35w Pricing Options
55w Pricing Options
DIGITAL 35w or 55w HID Bulbs
35w Pricing Options
55w Pricing Options
DIGITAL 35w or 55w HID Ballasts
Shown here with D2S adapters.
35w & 55w Pricing Options
Miscellaneous Items & Add-Ins
Did you remember to add bulbs, ballasts and a wiring harness to your order? All retrofits require these items!
Pricing
+ $100.00 OEM Philips 85122+ D2S HID Bulbs
+ $10.00 Chrome Covered Amber/Superwhite Indicator Bulbs
+ $15.00 Chrome Covered Amber/Superwhite Blinker Bulbs