Author Archives: Caesar

About Caesar

Founder, LightWerkz.net

James’ Honda CR-V – Morimoto FXR Bixenon Projector Conversion

James sent over a brand new set of Honda CR-V headlights for a proper HID projector conversion. He supplied us with the Morimoto FXR 3.0 Bixenon projectors, OEM Osram CBI D2S Bulbs, 100mm xB LED rings, Apollo shrouds, OEM Denso … Continue reading

Posted in CRV, Honda, xB LED Angel Eyes Morimoto | Leave a comment

Baruch’s 1996 Chevy Tahoe – Morimoto H1 Bixenon Projector Conversion

Baruch requested a plug and play conversion for his 1999 Chevy Tahoe. We ordered up a set of lights for him and were able to fit in the Morimoto H1 Bixenon projectors from the rear. These housings are so narrow … Continue reading

Posted in Chevy, H1 Bixenon Projectors, Tahoe | Leave a comment

Lucky’s Lexus IS300 – Blacked Out Housings + LED Angel Eyes

Lucky sent over a brand new set of OEM Lexus IS300 headlights for a blacked out housing and LED angel eye conversion. The rings were provided by Flash Tech, which fit perfectly on this application. The LED’s were masked off … Continue reading

Posted in IS300, LED Angel Eye, Lexus | Leave a comment

Tom’s Audi A4 – FXR Bixenon Conversion

Extremely satisfied with the conversion we performed on his Toyota 4Runner, Tom decided to have us convert his wife’s 2007 Audi A4. The stock sealant was removed and replaced with the Koito butyl sealant. The housings were left in original … Continue reading

Posted in Audi A4, FXR, Iris | Leave a comment

Michael’s Dodge Challenger – FXR Bixenon Conversion

We provided Michael with this plug and play conversion package for his 2009 Dodge Challenger. The headlights were retrofitted with the Stage 1 Morimoto FXR Bixenon Projector package. The housings and low beam reflectors were painted semi flat black. The … Continue reading

Posted in Apollo, Challenger, Dodge, FXR | Leave a comment

Guerin’s BMW E36 – OEM FX45 Bixenon Projector Conversion

Guerin sent over a brand new set of E36 AL Euro Headlights for an OEM FX45/TSX-R Lens Projector conversion. We removed the inner low beam glass cover to maximize performance. The E55-R shroud was fitted on the low beam to … Continue reading

Posted in BMW, E36, E55 Shrouds, OEM FX45 Projectors | Leave a comment

Sam’s FJ Cruiser – RHD H1 Bixenon Conversion

Sam sent over a brand new set of Toyota FJ Cruiser headlights for a Morimoto H1 Bixenon projector conversion. We used the Gatling Gun V1 Shrouds with the new Morimoto xB LED rings mounted from behind to give these headlights … Continue reading

Posted in FJ Cruiser, Gatling Gun V1 Shrouds, xB LED Angel Eyes Morimoto | Leave a comment

Paul’s S2000 – Quad Projector Conversion

Paul came by with his newly acquired S2000, along with a set of older gen headlights, and clear reflectors. We swapped out the headlights so he could continue driving the car while the lights were being retrofitted. Being used to … Continue reading

Posted in H1 Bixenon Projectors, S2000 | Leave a comment

Joe’s 2010 Altima – H1 Bixenon Conversion

Joe had us convert his 2010 Nissan Altima with the H1 Bixenon projectors and Bullet shrouds. These shrouds fill in the reflector almost perfectly which is why they were chosen. The side amber reflector was removed. The original permanent sealant … Continue reading

Posted in Altima, Bullet Shrouds | Leave a comment

Bill’s 2011 Kawasaki Ninja – Dual Morimoto H1 Bixenon Projector Conversion + Angel Eyes

Bill sent over his 2011 Kawasaki Ninja headlights for a proper HID projector conversion. Both the low and high beam reflectors were retrofitted with the Morimoto Mini H1 Bixenon projectors. The internals of the lights were blacked out and 90mm … Continue reading

Posted in Angel Eye, H1 Bixenon Projectors, Kawasaki, Ninja | 2 Comments